首页 > 科技 > 计算机 > 辅助设计

SolidWorks 2020中文版入门、精通与实战

作译者：左嘉琦,罗晓程,陈彦豪

出版时间：2021-05 千字数：592 版次：01-01 页数：368

开本：16开装帧： I S B N ：9787121408991

换版：

纸质书定价：￥89.0

库存:有

分享到：

共有图书评论0条【查看评论摘要】

看了又看

{{data.bookName}}

￥{{data.price}}

内容简介

前言

上架建议

作者简介

编辑推荐

音视频专区

Charpter 1 SolidWorks 2020 快速
入门······························1
1.1 工作界面·····························2
1.2 基本操作·····························3
1.2.1 视图的基本操作············.3
1.2.2 键鼠操作·····················.5
1.3 工作环境的设置····················5
1.4 参考几何体的创建··············.11
1.4.1 基准面的创建与修改·····.11
1.4.2 基准轴、坐标系和点的
创建·························.14
1.4.3 质心和边界框的创建·····.16
1.5 鼠标笔势··························.17
1.6 入门案例——管件设计········.18
Charpter 2 绘制2D 草图················.23
2.1 草图环境··························.24
2.1.1 草图界面····················.24
2.1.2 草图绘制方法··············.24
2.1.3 草图约束信息··············.25
2.2 草图动态导航····················.27
2.2.1 动态导航的推理图标·····.27
2.2.2 图标的显示设置···········.28
2.3 草图对象的选择·················.29
2.3.1 选择预览····················.29
2.3.2 选择多个对象··············.29
2.4 绘制草图基本曲线··············.30
2.4.1 直线与中心线··············.30
2.4.2 圆与周边圆·················.34
2.4.3 圆弧··························.38
2.4.4 椭圆与椭圆弧··············.40
2.4.5 抛物线与圆锥双曲线·····.43
2.5 绘制草图高级曲线··············.44
2.5.1 矩形·························.44
2.5.2 槽口曲线···················.45
2.5.3 多边形······················.47
2.5.4 样条曲线···················.48
2.5.5 绘制圆角···················.52
2.5.6 绘制倒角···················.53
2.5.7 文本·························.56
2.6 综合案例：绘制垫片草图·····.57
Charpter 3 草图变换与约束·············61
3.1 草图变换操作····················.62
3.1.1 利用剪贴板复制草图
对象·························.62
3.1.2 移动、复制、旋转、缩放及
伸展草图对象·············.62
3.1.3 等距复制草图对象········.65
3.1.4 镜像与阵列草图对象·····.66
3.1.5 剪裁及延伸草图对象·····.69
3.1.6 草图变换工具的应用·····.70
3.2 草图对象的约束·················.74
3.2.1 尺寸约束···················.74
3.2.2 几何约束···················.76
3.3 综合案例··························.78
3.3.1 案例一：绘制手柄支架
草图·························.78
3.3.2 案例二：绘制转轮架
草图·························.82
3.3.3 案例三：绘制转轮架
草图·························.85
Charpter 4 构建3D 空间曲线···········87
4.1 认识3D 草图·····················.88
4.1.1 3D 空间控标···············.88
4.1.2 绘制3D 直线···············.89
4.1.3 绘制3D 点·················.94
4.1.4 绘制3D 样条曲线·········.94
4.1.5 曲面上的样条曲线········.94
4.1.6 3D 草图基准平面·········.95
4.1.7 编辑3D 草图曲线·········.98
4.2 曲线工具··························101
4.2.1 通过XYZ 点的曲线····.101
4.2.2 通过参考点的曲线······.102
4.2.3 投影曲线··················.103
4.2.4 分割线·····················.107
4.2.5 螺旋线/涡状线·············112
4.2.6 组合曲线····················113
4.3 综合案例——音响建模········113
Charpter 5 凸台/基体特征设计······.127
5.1 特征建模基础····················128
5.2 拉伸凸台/基体特征·············129
5.2.1 【凸台-拉伸】属性
面板·······················.129
5.2.2 拉伸的开始条件和终止
条件·······················.130
5.2.3 拉伸截面的要求·········.132
5.3 旋转凸台/基体特征·············136
5.3.1 【旋转】属性面板······.136
5.3.2 关于旋转类型与角度···.137
5.3.3 关于旋转轴···············.137
5.4 扫描凸台/基体特征·············139
5.4.1 【扫描】属性面板······.139
5.4.2 扫描轨迹的创建方法···.139
5.4.3 带引导线的扫描特征···.140
5.5 放样/凸台基体特征·············143
5.5.1 创建带引导线的放样
特征·······················.144
5.5.2 创建带中心线的放样
特征·························144
5.6 边界凸台/基体特征·············146
5.7 综合案例——矿泉水瓶
造型································147
5.7.1 创建瓶身主体··············147
5.7.2 创建附加特征··············148
Charpter 6 创建工程特征·············.157
6.1 创建倒角与圆角特征···········158
6.1.1 倒角·························158
6.1.2 圆角特征···················159
6.2 创建孔特征·······················162
6.2.1 简单直孔···················162
6.2.2 高级孔······················163
6.2.3 异形孔向导················164
6.2.4 螺纹线······················165
6.3 抽壳与拔模·······················169
6.3.1 抽壳特征···················170
6.3.2 拔模·························170
6.4 对象的阵列与镜像··············172
6.4.1 阵列·························172
6.4.2 镜像·························174
6.5 筋及其他特征····················175
6.5.1 筋特征······················175
6.5.2 形变特征···················179
6.6 综合实战——中国象棋造型
设计································187
Charpter 7 曲面造型设计·············.195
7.1 基础曲面设计····················196
7.1.1 填充曲面···················196
7.1.2 平面区域···················197
7.1.3 等距曲面···················198
7.1.4 直纹曲面···················198
7.1.5 中面·························201
7.1.6 上机实践——基础曲面
造型应用·················.201
7.2 曲面编辑与修改·················204
7.2.1 曲面的延展与延伸······.204
7.2.2 曲面的缝合与剪裁······.206
7.2.3 曲面的删除与替换······.208
7.2.4 曲面与实体的修改
工具·······················.209
7.2.5 上机实践——汤勺
造型·························211
7.3 综合案例——水龙头曲面
造型································217
Charpter 8 PhotoView 360 模型
渲染·························.221
8.1 渲染概述··························222
8.1.1 认识渲染··················.222
8.1.2 启动PhotoView 360
插件·······················.222
8.1.3 PhotoView 360 菜单及
工具栏····················.222
8.2 PhotoView 360 渲染功能······223
8.2.1 渲染步骤··················.223
8.2.2 应用外观··················.224
8.2.3 应用布景··················.227
8.2.4 光源与相机···············.228
8.2.5 贴图和贴图库············.238
8.2.6 渲染操作··················.243
8.3 综合案例··························245
8.3.1 案例一：宝石戒指
渲染·······················.245
8.3.2 案例二：电灯泡渲染···.249
Charpter 9 零部件装配设计··········.255
9.1 装配概述··························256
9.1.1 计算机辅助装配·········.256
9.1.2 进入装配环境··············257
9.2 开始装配体·······················258
9.2.1 插入零部件················259
9.2.2 配合·························261
9.3 控制装配体·······················265
9.3.1 零部件的阵列··············265
9.3.2 零部件的镜像··············266
9.3.3 移动或旋转零部件········268
9.4 布局草图··························268
9.4.1 布局草图的功能···········268
9.4.2 布局草图的建立···········269
9.4.3 基于布局草图的装配体
设计·························269
9.5 装配体检测·······················270
9.5.1 间隙验证···················270
9.5.2 干涉检查···················271
9.5.3 孔对齐······················272
9.6 爆炸视图··························272
9.6.1 生成或编辑爆炸视图·····272
9.6.2 添加爆炸直线··············273
9.7 综合案例··························274
9.7.1 案例一：脚轮装配
设计·························274
9.7.2 案例二：台虎钳装配
设计·························280
9.7.3 案例三：切割机工作部
装配设计···················286
Charpter 10 工程图设计···············.291
10.1 工程图概述·····················292
10.1.1 设置工程图选项·········292
10.1.2 建立工程图文件·········293
10.2 标准工程视图··················296
10.2.1 标准三视图···············296
10.2.2 自定义模型视图·········297
10.2.3 相对视图················.298
10.3 派生的工程视图···············299
10.3.1 投影视图················.299
10.3.2 剖面视图················.299
10.3.3 辅助视图与剪裁
视图······················.302
10.3.4 断开的剖视图··········.303
10.4 标注图纸························304
10.4.1 标注尺寸················.304
10.4.2 注解的标注·············.308
10.4.3 材料明细表·············.310
10.5 工程图的对齐与显示·········312
10.5.1 操纵视图················.312
10.5.2 工程视图的隐藏和
显示······················.314
10.6 打印工程图·····················314
10.6.1 为单独的工程图纸指定
设定······················.314
10.6.2 打印整个工程图图纸·.315
10.7 综合案例——阶梯轴工
程图······························315
Charpter 11 机械设计综合案例······.321
11.1 利用内置插件设计零件······322
11.1.1 应用FeatureWorks
插件························322
11.1.2 应用Toolbox 插件·······327
11.1.3 应用MBD（尺寸专家）
插件························331
11.1.4 应用TolAnalyst（公差
分析）插件···············334
11.2 利用外部插件设计零件······339
11.2.1 GearTrax 齿轮插件的
应用························340
11.2.2 SolidWorks 弹簧宏
程序························344
11.3 机械零件设计综合案例······345
11.3.1 案例一：Toolbox 凸轮
设计························345
11.3.2 案例二：钻头零件
设计························346
11.3.3 案例三：凸轮机构运动
仿真························349
11.3.4 案例四：夹钳装配体静应
力分析·····················354

SolidWorks 是由三维软件开发商SolidWorks 公司发布的三维机械设计软件，是目前市场上唯一集三维设计、分析、产品数据管理、多用户协作及模具设计、线路设计等功能于一体的软件。为了满足SolidWorks 软件日新月异的变化及广大用户的需求，本书综合多位老师的丰富教学经验，将基础知识与实例相结合同步进行讲解，帮助读者熟悉使用SolidWorks 软件。
本书编者长期从事SolidWorks 专业设计和教学工作，对SolidWorks 软件有较深入的了解，并积累了大量实际工作经验。本书在编写过程中采用通俗易懂的讲解方式，并系统阐述了SolidWorks 各种工具、命令的使用，通过分享设计实例作品使读者掌握完整的造型设计制造过程，提升设计能力。
本书内容
本书图文并茂，讲解深入浅出，贴近工程，把众多专业知识点有机地融合到每章内容中。
全书共分为11 章，大致内容介绍如下。
第1 章：本章主要介绍SolidWorks 2020 的工作界面、基本操作、环境设置、参考几何体的创建及鼠标笔势等入门基础知识。
第2 章：本章主要介绍二维平面草图的绘制知识。
第3 章：本章主要介绍草图的变换与约束，包括草图变换操作和草图对象的约束。
第4 章：本章详细介绍3D 草图和空间曲线的创建。
第5 章：本章主要介绍SolidWorks 2020 的基体特征的创建与建模应用。
第6 章：本章主要介绍SolidWorks 附加特征工具的创建与实际建模应用。
第7 章：本章详细讲解SolidWork 基础曲面、曲面修改和曲面编辑等相关工具指令，以及曲面工具在曲面造型设计中的实战应用。
第8 章：本章详细介绍SolidWorks 2020 的PhotoView 360 模块的渲染设计功能，以典型范例来讲解产品渲染的整个操作流程。
第9 章：本章全面介绍建立装配体、零部件压缩与轻化、装配体的干涉检测、控制装配体的显示、其他装配体技术及装配体爆炸视图的完整设计。
第10 章：本章内容包括SolidWorks 2020 工程图环境设置、建立工程图、修改工程图、尺寸标注和技术要求、材料明细表和转换为AutoCAD 文档。
第11 章：本章主要介绍SolidWorks 机械设计插件、运动仿真模块和有限元分析模块的综合运用。
本书特色
本书以实用、易理解、操作性强为准绳，以实际工作案例为脉络，透彻地讲解软件的具体使用方法，帮助读者找到一条学习使用SolidWorks 的捷径。
本书最大特色在于：
? 功能指令全；
? 穿插海量典型的实际案例；
? 视频教学与书中内容相结合；
? 赠送大量有价值的学习资料及练习内容。
本书适合SolidWorks 的初学者及想提高SolidWorks 操作水平的读者，通过学习可打下良好的三维工程设计基础。

查看更多 > 图书评论

暂无评论

发表图书评论

评论标题：
评论内容：
验证码：: 看不清楚
点击刷新
: 您还没有登录，请登录后再评论。
点击“登录”

购买过本书的顾客还买过

{{data.bookName}}

￥{{data.price}}