电子工业出版社-网上书店

本书共分为 6章。第 1章为绪论，主要讲述电路实验入门基本知识。第 2章为常用元器件和电子仪器的使用，本部分首先介绍了电路中常用的电子元器件，然后重点介绍了常用电子仪器的使用方法。第 3章为 Multisim 14电路仿真与设计实例，重点介绍了 Multisim 14的软件及仿真分析方法，并给出 4个电路仿真实验案例。第 4章为电路分析基础实验，给出了 14个电路实验及 5个电子技术实验。实验任务难度由浅到深，从基础实验入手，递进式地引入设计性实验，循序渐进地培养学生的实验能力，每个实验均配有预习自检环节。为了方便学生在“互联网 +”时代下的移动学习，部分实验配有微课视频，可扫描二维码进行观看学习。第 5章为第 4章实验 4.1～4.10的全文英文翻译。第 6章为综合实验项目研究与实践，可为学习基础好的学生提供课外综合电子技术实践选题，提高学生的创新能力。本书可以作为高等院校及独立学院电路实验课程的教材和教师的教学参考书，同时也可以作为非电类专业学生电路与电子技术实验教材和留学生学习电路实验的教程。

第1章 绪论 ··························································································· - 1 -
1.1 概述 ································································································· - 1 -
1.2电路实验课的要求 ··············································································· - 3 -
1.3实验数据的误差分析与处理 ··································································· - 8 -
1.4动力电源与用电安全措施 ····································································· - 12 -
1.5电路实验故障排除 ·············································································· - 16 -第 2章 常用元器件和电子仪器的使用 ············································ - 18 -
2.1电阻器和电位器 ················································································· - 18 -
2.2 电容器 ····························································································· - 22 -
2.3 电感器 ····························································································· - 24 -
2.4半导体元器件 ···················································································· - 24 -
2.5运算放大器 ······················································································· - 28 -
2.6数字万用表 ······················································································· - 29 -
2.7数字交流毫伏表 ················································································· - 31 -
2.8数字示波器 ······················································································· - 33 -
2.9函数信号发生器 ················································································· - 44 -
第 3章 Multisim 14电路仿真与设计实例 ······································· - 49 -
3.1 Multisim 14简介 ················································································· - 49 -
3.2 Multisim 14工作界面 ··········································································· - 50 -
3.3 Multisim 14仿真入门 ··········································································· - 52 -
3.4 Multisim 14仿真分析方法 ····································································· - 56 -
3.5 Multisim14仿真分析入门实例 ································································ - 58 -
3.6叠加定理、戴维南定理、昀大功率传输定理仿真实例 ·································· - 64 -
3.7日光灯电路功率因数提高的仿真实例 ······················································· - 73 -
3.8 RLC串联谐振电路仿真实例 ·································································· - 76 -
3.9 一阶 RC电路的暂态过程仿真实例 ·························································· - 79 -

第 4章 电路分析基础实验 ································································· - 85 -
实验 4.1常用电子仪器的使用 ····································································· - 85 -
实验 4.2基本电参数的测量 ········································································ - 89 -
实验 4.3元器件的伏安特性测量 ·································································· - 92 -
实验 4.4叠加定理 ···················································································· - 97 -
实验 4.5戴维南与昀大功率传输定理 ···························································· - 99 -
实验 4.6单相交流 RLC电路 ···································································· - 102 -
实验 4.7日光灯电路与功率因数的提高 ······················································· - 106 -
实验 4.8 一阶 RC电路暂态过程的研究 ······················································· - 111 -
实验 4.9 RLC串联谐振电路 ····································································· - 115 -
实验 4.10三相交流电路的测量 ································································· - 120 -
实验 4.11 二阶 RC电路的暂态过程 ···························································· - 125 -
实验 4.12无源滤波器频率特性的研究 ························································ - 128 -
实验 4.13二端口网络等效参数及连接 ························································ - 132 -
实验 4.14电感线圈参数的测量 ································································· - 135 -
实验 4.15分压式共射极放大电路的研究 ····················································· - 139 -
实验 4.16运算放大器的线性应用 ······························································ - 144 -
实验 4.17组合逻辑电路设计 ···································································· - 149 -
实验 4.18 计数器 ··················································································· - 153 -
实验 4.19直流稳压电源设计 ···································································· - 158 -
The Chapter 5 Basic experiment on circuit analysis················· - 164 -
Experiment 5.1 The use of common electronic instruments ··································· - 164 -
Experiment 5.2 Measurement of basic electrical parameters·································· - 168 -
Experiment 5.3 Volt-ampere characteristic measurements of the electronic component ·· - 172 -
Experiment 5.4 Superposition theorem··························································· - 175 -
Experiment 5.5 Thevenin＇s theorem and maximum power transfer theorem·············· - 177 -
Experiment 5.6 AC RLC circuit··································································· - 179 -
Experiment 5.7 Fluorescent lamp circuit and power factor improvement ··················· - 183 -
Experiment 5.8 Study on transient process of first order RC circuit ························· - 187 -
Experiment 5.9 RLC series resonance circuit ··················································· - 191 -
Experiment 5.10 Three-phase AC circuit measurement ········································ - 196 -
第 6章 综合实验项目研究与实践 ·················································· - 201 -
实验 6.1温度测量与显示电路 ··································································· - 201 -
实验 6.2去噪声电路 ··············································································· - 202 
-实验 6.3信号波形分离及合成实验电路 ······················································· - 203 
-实验 6.4简易数控直流电源 ······································································ - 205 -
实验 6.5电机转速测量电路 ······································································ - 207 -
实验 6.6简易电容测量仪 ········································································· - 208 -
实验 6.7简易信号发生器 ········································································· - 209 -
实验 6.8正弦波相位差检测电路 ································································ - 210 -
实验 6.9简易窗帘自动开关电路 ································································ - 211 -
实验 6.10循环彩灯控制器 ······································································· - 213 -
实验 6.11三极管放大倍数 β测量电路 ························································ - 214 -
实验 6.12过欠电压保护电路设计 ······························································ - 215 -
实验 6.13电压频率转换电路 ···································································· - 216 -
实验 6.14声控延时开关电路 ···································································· - 217 -
实验 6.15十字路口交通灯控制电路设计 ····················································· - 218 -
实验 6.16自动寻迹小车 ·········································································· - 220 -
参考文献 ··························································

前 言 

电路实验，是高等院校电子、电工类本科生学习专业技术基础的第一门实践课，是基础课与专业课的搭桥课，是培养学生解决问题思维、专业思维和基本技能的重要课程。本书以培养和提升学生实践能力和创新能力为目标，对培养学生探究科学实验兴趣、训练学生工程实践的逻辑思维能力有很好的指导作用。本书以引导为目的，将学生带入自主学习的实验领域中，重点培养学生电路基础及设计性实验、综合性实验能力，昀终帮助学生完成电路实验。
本书难度适中，强调基础性实验与设计性实验相结合，注重理论联系实际，培养学生独立解决问题的能力。本书在设计上沿用了传统必要的基础验证性实验原理。在难度的设计上由浅入深，主讲教师可根据学生所学专业、差异性学习特点、课程的学时数选择实验项目和安排相应的实验任务。本书将现代的 EDA技术融入实验项目中，通过典型的仿真实例介绍，让学生掌握电路仿真工具的使用技巧，告诉学生该如何通过电路仿真设计完成实验，采取循序渐进的方式设定若干阶段，逐步放手，让学生领会学习进阶的乐趣，培养学生利用计算机仿真软件进行电路分析的能力。本书主要特点如下所述：
第一，在教学理念上，以学生为中心，关注每位学生完成实验项目的学习目标达成进度，递进式培养学生的实践能力。在实验设计上保留传统必做的经典验证性实验，设计了具有扩展性的设计性实验及提高学生更高层次能力的综合性实验，为学有余力的学生留出发展能力的学习空间。
第二，在教学方法上，增加了学生实验预习及课前检测环节。强调学生实验预习环节的重要性，以问题为导入，帮助学生抓住实验课预习的重点，养成自主学习的习惯。改变以往学生在实验教学中让教师“抱着走”的惰性，培养学生批判性的思维能力。
第三，本书第 5章为电路基础实验英文翻译，方便留学生进行电路实验学习，同时也为工科学生学习专业英语打下良好的基础。
第四，本书具有新形态教材特征。书中多个实验项目的基础实验配有帮助学生课前预习的微课视频，学生可随时随地，通过扫描二维码方式，碎片化地进行课前学习。
本书分为 6章。全书由吴霞主编，并负责总体规划和全书统稿。书中所有微课视频，由李弘洋完成二维码生成编辑工作。其中，第 1章为绪论，第 2章为常用元器件和电子仪器的使用，第 3章为 Multisim14电路仿真与设计实例，第 4章为电路分析基础实验，第 5章为电路基础实验英文翻译，第 6章为综合实验项目研究与实践。

本书由吴霞编写第 1章，第 4章第 4.1节、4.9节，第 5章第 5.1～5.2节，第 6章第 6.3节；沈小丽编写第 2章第 2.1～2.5节，第 4章第 4.12节；李弘洋编写第 2章第 2.6～2.9节，第 3章第 3.1～3.4节；王燕杰编写第 3章第 3.5节、3.7节，第 4章第 4.11节，第 4.15～4.18节，第 5章第 5.3～5.10节，第 6章第 6.4～6.14节；李敏编写第 3章第 3.8节，第 4章第 
4.2～4.6节，第 4.10节，第 4.13～4.14节，第 6章第 6.1～6.2节；池金谷编写第 3章第 3.6节、3.9节，第 4章第 4.7～4.8节，第 4.19节，第 6章第 6.15～6.16节。
本书编撰人员，皆为电路实践教学工作的一线教师，结合近 30年的教学改革体会，编写了与学生水平相适应的电路实验教材，满足不同层次学生需求。本书同时也可作为电路电子实验用书，面向对象为普通高校工科类应用型本科生及留学生。
由于编者水平有限，书中难免存在疏漏和不足之处，恳请广大读者提出宝贵意见。
编 者 2017年 7月

吴霞：女，汉族1964年9月生，籍贯浙江，中国计量大学，副教授；毕业于浙江大学，至今教学工作31年，长期致力于电路基础等课程的教学。__eol__

本书配套资源下载

对不起，暂无音视频资源！

电路实践教程